Pro Tips for Installing & Maintaining SMOK TF Tank BF-Mesh Coils
Share
In a SMOK vape, users understand how a coil determines their vaping experience. The coil is the most important component of any vape device; it heats the e-liquid, turns the liquid into vapor, and directly determines the taste and smoothness of the vapor with every puff. If you do not have a coil setup, no matter how great the tank is and no matter how great the e-liquid is, it will not do the job. This is why the appropriate SMOK TF Tank BF-Mesh Coil is such an important factor in how well the vape device is working.
The most commonly used coils are because of their flavor intensity, vapor density, and durability. The mesh structure of these coils is what allows them to heat evenly, quickly, and produces thick vapor clouds. If you are a flavor chaser or cloud chaser, these coils are meant to provide you with the experience you are looking for every single time.
Even top-quality coils need proper use to be effective. Proper installation and upkeep of your TF coils will get you the same taste every time, avoid dry heating, and help the coil last longer. A few easy steps can make the difference between a smooth draw and a harsh, burnt draw. Below are the most important steps to help you install and maintain your SMOK TF Tank BF-Mesh Coils.
Understanding the SMOK TF Coil Series
What are TF Coils?
The TF coil series by Smoktech was made for the TF Tank, which is a sub-ohm tank built for high performance and intense flavor. Something that sets these coils apart is the mesh heating elements, which are able to accomplish quicker and more uniform heating when compared to standard wire coils. The mesh design improves the process of vaporization which keeps every puff clean and consistent. TF coils are a top choice for vapers who are after thicker vapor and stronger flavor.
Design And Build Quality
Each TF Tank BF-Mesh Coil is constructed for accuracy and durability. The coil design features a significant surface area of mesh material that is tightly wrapped around premium organic cotton. This construction permits rapid coil heating and effective e-liquid evaporation. This characteristic is significant because it eliminates dry hits. The stainless steel covering provides the coil with stability and resistance to high temperatures even if we repeatedly use the coil over prolonged periods. All of these design features come together to ensure that a TF coil is safe to use and powerful.
Performance
The TF coil performs superbly in both the amount of vapor produced and richness of flavor. The mesh construction provides a liable and evenly balanced draw whether you vape directly into your lungs or in a more confined way. The coil enables you to appreciate the flavor of your e-liquid significantly better, produces far more vapor, and reduces spit back. These features make the SMOK TF Tank BF-Mesh Coils perfect for people who vape to get a reliable and consistent coil for every session. The most striking aspect is the coil endurance and quality which keeps you coming back.
TF BF Mesh Coil Compatibility
Compatible Devices
The TF Tank BF-Mesh Coil is mainly used for the SMOK TF Tank, but also works for other Smok vape devices having the same tank base and threading and some devices from the SMOK sub-ohm series that are compatible with TF coil heads. Nonetheless, you should always consult your device manual or Smoktech's official compatibility overview before using. Using the wrong coil may lead to improper fitting, inadequate vapor, and inconsistent coil performance. Compatibility also influences the safety of the device.
Smoktech System Design
Each Smoktech tank and coil series is designed around specific airflow and wattage ranges. The TF BF coils are designed to create specific smooth airflow and are balanced to the heating for the coil. Using an improper coil can lead to unsatisfactory vapor production and the fear of dry hit. Pairing your tank and coil properly will provide you optimum performance and longevity for your device. For best results, always use the suggested wattage from the manufacturer.
How to Install SMOK TF Tank BF-Mesh Coils
Step-by-Steps
When it’s time for the new coil you need to detach your tank from your vape device, unscrew the tank base and remove the old coil if one is there. Now take one of the TF BF Coils and add 2-3 drops of e-liquid to the exposed cotton in order to prime it. Now screw the new coil to the tank base and make sure not overly tight it. Your tank is now ready for e-liquid. You need to let it aside for 5-10 minutes to avoid any sort of dry hits.
Common Mistakes
Vaping immediately after coil installation is one of the most common mistakes. The cotton is burned before it completely absorbs e-liquid and you end up increasing the time needed for coils to perform. Always prime, wait, and use e-liquid that is compatible with the coil. 70/30 e-liquid and TF BF Coils will perform great. It is best to use e-liquid with 70/30 vg/pg. The longer you wait, the better your coils will perform.
Priming the TF Tank BF-Mesh Coil
Why Priming is Important
Vaping starts with proper priming of the TF Tank BF-Mesh Coil. Cotton inside the coil must fully absorb e-liquid in order to avoid dry or burnt hits. If not fully primed, coils may overheat, causing cotton to burn, which ruins the flavor. Proper priming provides smooth vapor, increased coil lifespan, and helps prepare the coil for first use. This is essential to avoid burning hits when starting to use the coil.
How to Priming the Coil
First step, put on the coil and add 3-4 drops of e-liquid directly on to the exposed cotton sections which helps begin the soaking process. After that, place the coil into the SMOK Tank TF Tank and fill the tank. After that, let it sit for 10 minutes. This is to allow full saturation of the cotton. Finally, before taking the first vape, use dry pulls to help e-liquid draw into the coil.
Avoiding Dry Hits
Reasons
A dry hit happens when your coil’s cotton doesn’t have enough e-liquid to vaporize. This can happen when vaping at higher identified wattages or when using e-liquids of greater viscosity that have difficulty wicking. Rapidly taking several hits, or chain vaping, drying out the cotton. The most common reason though is having low e-liquid levels in your tank. These causes will definitely help pinpoint why there is that terrible burnt taste.
Prevention Tips
To stop dry hits, keep your tank above half full. This ensures there’s enough liquid for the cotton to soak up. Allow your coil to rest for a few seconds so it can soak up enough liquid in between hits. Ensure there’s nothing blocking your airflow as well. Overheating can happen when the airflow is blocked. Stick within the prescribed wattage range marked on the TF BF coil to have it working best. These practices will help keep your vape flavorful and enjoyable.
Maintaining Your SMOK TF Coils
Cleaning Methods
You can save the TF Tank SMOK BF-Mesh Coil by cleaning it. If you use clear e-liquids or less sweet e-liquids, you can rinse the coil under warm water to remove the coil residue. Cleaning can add days to the coil even if it won’t clean burnt coils. It is best to complete cleaning before the coil is reinstalled to allow complete drying, preferably overnight.
Signs of a Worn Coil
For the best taste and vapor, learn to identify when to replace a coil. The first sign of a worn coil is a burnt and muted flavor. You may also hear the coils gurgling and see leaking burnt e-liquids. Other signs of worn coils are decreased vapor production and burnt e-liquids. If you see these signs, it is best to replace your TF Tank BF-Mesh Coil to keep up the best performance.
Conclusion
The SMOK TF Tank BF-Mesh Coil is the center of any vaping system. If it is fitted, primed, and properly taken, it can provide weeks of rich vaping. With these instructions, the system should be smooth, satisfying, and flavorful. Discover premium coils and gear at Universe Vape. Your one-stop shop for everything vaping.
Explore More Blogs!
How to use SMOK TFV18 mesh coils?
SMOK TFV16 Mesh Coils Best Wattage For Big Flavor
SMOK RPM Pod Kit Coil Guide Mesh Vs MTL Explained
Smok V8 Coil Compatibility and Tank Fit
RPM 3 Coils: How Long Do They Last & How to Extend Their Life
TFV8 T8 Octuple Coil vs Mesh & Other Coils – Find Your Best Fit
TFV16 Lite Coils I Dual Mesh vs Conical Mesh
Smok TA Replacement Coils I Why Loved By Vapers
SMOK Baby V2 Coils Are a Game-Changer for Vapers
SMOK RPM160 Coils Review – Best Mesh Coil for Flavor & Clouds
8 Hacks to Get Bigger Clouds Without Burning Your Coil
SMOK Nord Ceramic 1.4 Coil – Ideal Settings & Wattage Guide
How to Choose Between SMOK Nord Pro 0.9 vs 0.6 Coils for Flavor & Clouds
Best Pod Kits Compatible with SMOK LP2 Coils (RPM 4, Morph, Nord 50W, G-Priv)
Why the TFV9 0.15 Mesh Coil Is a Top Pick for Sub-Ohm Vapers
Troubleshooting SMOK LP1 Coils: Burnt Taste, Weak Hits & Leaks