How to Make Your Vape Coil Last Longer

Coil is considered to be the most important part of the vape. It is the component responsible for heating the e-liquid and creating the vapor, but due to the continuous exposure to heat and the e-liquid, the vape coil wears out eventually. In case you notice that the vape coil produces a burnt taste, reduced flavor, weak vapor, and bad vaping experience, then it might be time for you to change it.

But not always should you change your vape coil regularly. This is due to factors such as how you use your vape, type of e-liquid, wattage of your vape, among other maintenance practices, which might reduce the life of the vape coil. You can help extend the life of your vape coils by doing some simple things.

What Is a Vape Coil? 

How Does a Vape Coil Work? 

Vape coil is the heating element that can be found in the vaporizer tank or cartridge. Once the device is used, the battery will send electrical current through the coil to make it hot. Then the hot coil heats the e-liquid that is soaked by the wick to create vapor. Due to being constantly heated and exposed to the e-liquid, the coil will gather residues.

Why Does a Vape Coil Wear Out? 

Several things could contribute to the coil burnout process. Such things include over vaping, higher power, chain vaping, sweetness in the e-liquid, and bad coil priming practices. Being aware of these things helps you to prevent wasteful coil changes.

Prime Your New Coil Properly

Why Is Coil Priming Important?

A new vape coil can be ruined immediately when the user does not ensure if the coil is properly primed. The coil can get burned due to the high temperatures when dry, giving off a burned flavor. Priming your coil will ensure that your coil is properly saturated with e-juice.

How to Prime a Vape Coil?

Before the use of a fresh coil, ensure you follow the directions given by your device maker. As a general rule, you are supposed to saturate the visible coil with the e-liquid when possible, fill the tank or pod, and wait for the e-liquid to absorb in the coil. Using the vape at a lower wattage will also support the device in avoiding vape coil burning.

Use the Correct Wattage

Why Does Wattage Matter?

Wattage is a key indicator of the amount of power supplied to the coil. The higher the wattage, the more heat will be generated. However, excess power will lead to drying or burning of the coil. It is always recommended to check the mentioned wattage range for your coil.

Start With a Lower Wattage 

Whereas you have a range of wattages in your coil, beginning at the lower end will enable you to establish a good point without overloading the vape coil. It is possible for you to adjust the wattage to higher levels within the recommended range.

Avoid Chain Vaping

What Is Chain Vaping?

Chain vaping is the rapid use of the vape when you take several puffs one after another without allowing enough time for the coil to be soaked up with the e-liquid. If you keep chain vaping regularly, the coil might not remain saturated all the time.

Give Your Coil Time to Rewick

A break in between each inhalation provides additional time for the wick to saturate itself with e-liquid. This especially applies when the use of high-power devices is involved. If you feel the dry or burnt taste while vaping, discontinue and let the coil get saturated again before taking another inhalation.

Choose the Right E-Liquid

How E-Liquid Affects Coil Life

The liquid that you are using can affect how long the vape coil lasts. Some of the liquids, especially those that are very sweet, may cause some buildup in the coil. This can affect the quality of your flavor and vapor.

Consider Your E-Liquid Composition 

Different vaporizers or atomizers have been developed based on specific types of liquid formulations. Always verify your vaporizer or atomizer recommendations prior to using e-liquid. Choosing the right liquid will aid in achieving good coil performance. 

Clean Your Vape Device Regularly

Why Cleaning Your Tank Matters

Over time, e-liquid buildup may form in the tank. Cleaning will be able to keep the flavor and performance of the device at its best. A clean tank will also prevent any e-liquid buildup from negatively impacting the flavor of the new e-liquid.

How to Clean a Refillable Tank 

Always follow the manufacturer’s cleaning instructions. When it comes to tanks that can be rinsed out, remove the coil, and all other components which should be removed, rinse them with water, and let them dry out thoroughly. 

Know When to Replace Your Coil

Common Signs of a Worn-Out Coil

If your vape coil gives you a burnt taste, flavor deficiency, minimal vapor production, or strange gurgling sounds, it probably needs replacing. Sometimes leakage and residue formation around the coil indicate that it should be replaced.

Don't Force a Worn-Out Coil 

In case a coil keeps having a burnt taste, there is a need for replacement of the same. This could be a sign of a bad coil that will deliver poor performance and bad taste when used.

Common Mistakes That Reduce Coil Lifespan

Using Excessive Wattage

Exposure to more watts than required can lead to overheating of the coil. Overheating might result in drying up of the wick or burning it. The coil may also deteriorate at a faster pace. You should always verify the recommended wattage for the coil from the range indicated on the package.

Forgetting to Prime the Coil

A new coil requires ample time for it to saturate itself with e-liquid before you begin your vaping. A dry or even a partially saturated coil may burn your wick, resulting in burnt tastes that will last long after. Correctly priming a new coil ensures full saturation of the wick before it is heated up.

Tips for Making Your Vape Coil Last Longer

Follow a Simple Coil-Care Routine

Proper care for the coils will help to improve the performance of your vape pen and prevent unnecessary replacements. Every new coil needs to be primed, use the recommended wattage range, and avoid chain vaping.

Pay Attention to Your Vape's Performance 

There are several ways that your device will alert you when the coil might need to be inspected. Flavor changes, vapor output, air flow, or the general performance of your vape can indicate when the coil is beginning to wear down. 

Conclusion 

The vape coil is a consumable item; hence, it will at one point have to be replaced. But proper maintenance of this equipment will enable it to have an extended life span and continue working well. Always prime the coil right, make sure you use the right wattage, avoid chain vaping, and make sure that the tank is well-filled.

Looking for the perfect coils? Find a shop near me and get started on your vaping journey today!