GeekVape Wenax Stylus Not Charging: Causes & Fixes

However, when your GeekVape Wenax Stylus doesn’t charge, it’s quite disappointing, and you might need the device badly at that moment. The most likely reason for the issue is something simple like a broken cable, dirt in the charging port, or bad connectivity.

Nevertheless, there are lots of charging issues that can be diagnosed and even repaired by yourself without going anywhere. Therefore, before you assume that there is an issue with your device or its battery, you should take a closer look at some simple solutions.

Here we will discuss all the most common issues which can prevent your GeekVape Wenax Stylus from charging and offer several ways of solving the problem. This information may be helpful for other Geekvape users whose devices have similar charging features.

Common Reasons Your GeekVape Wenax Stylus Is Not Charging

Check the Charging Cable and Power Source

If the problem lies with a faulty or broken charging cable, this should be one of the first issues you look at if you are having problems charging the GeekVape Wenax Stylus device. Try switching cables and attaching to a new charging source. Don’t use a damaged or exposed cable. If the device still will not charge, then try other fixes.

Inspect the Charging Port 

Particles may accumulate in the charging port to hinder the connection between the charging cable and phone. Switch off the device to see if there are any particles in the charging port. If there are any, you will have to clean the charging port using a soft and dry substance.

Problems With the Device Connection

Make Sure the Cable Is Connected Properly

At other times, the cable could seem to be connected to the phone but may actually not have made a good connection. Plug in your charging cable carefully into the phone and ensure that there is a good fit. You could have either a defective charging cable or charging port if the charge light comes on and off depending on how you move the cable.

Try a Different Compatible Charger 

In addition, the battery could affect your capability to charge the GeekVape Wenax properly. You can try charging the device using another battery source that works with the USB port to see if it will make the charging light come on. If the device charges with another source, it means that the initial one was the problem.

Battery and Temperature Issues

Let the Device Cool Down

Temperature is an element that may have an influence on the charging process for the vape device. In case your GeekVape Wenax Stylus becomes very hot, unplug it and wait until it cools completely. Do not try to charge the vape device when it becomes extremely hot or when there is some damage to the battery or body.

Check for Signs of Battery Damage 

In the instance that you've dropped, got your Wenax GeekVape product wet, or the device has swelled, it goes without saying that your battery has definitely been affected. It is not advisable for you to mess with the battery by attempting to open or repair the battery or even charge it. In case the vaporizer starts behaving strangely, like warming up or swelling up with a burnt smell, don't use it.

What to Do If Your GeekVape Wenax Still Won’t Charge

Restart and Test the Device

However, in situations where the charging procedure fails to work, one should disconnect the phone from the power source and wait for a while before trying to recharge again. The phone must be powered on or behave as expected and then plugged into an effective charging system. One should see whether the phone has any sign of charging light or any other sign.

Consider a Hardware Problem 

If all appears to be well with the cable, the power source, and the port being used to charge the device, then the problem may probably reside in the device itself. The problem could exist in the charging circuit of the device, or there could be issues with the battery of the device or even its internal wiring. You should never attempt to open up the GeekVape Wenax Stylus as it can harm the device as well as the battery.

How to Prevent Charging Problems

Keep the Charging Port Clean

Inspection of the charging port will help to safeguard it against any damage resulting from dust. It is advisable to store the GeekVape in a clean environment when it is not in use. You should not keep your device in your pants or bag because lint is likely to enter the charging port.

Use the Device and Charger Carefully 

Pulling out the cable at an angle or keeping it under stress when charging should be avoided. Charging with damaged cables should not be done, and the devices should be charged neither in too hot nor too wet environments. Taking care of basic maintenance issues will keep your Geekvape devices in better shape.

Conclusion 

GeekVape Wenax Stylus which is not charging is not always considered to have malfunctioned. Before concluding that there is any problem with the device, one needs to check the cable, the power source, the charging port, and the heat of the device. In case of any issues with the gadget being charged where the gadget is damaged or heated, one needs to stop its use.
Explore top vape products near me and order with confidence at Vape Universe.